Skip to content
Kitchon

Type to search articles

Supported printers

Which receipt and kitchen printers work with Kitchon.

Updated November 17, 2026

What works

Receipt and kitchen printers that connect to your network cable or Wi-Fi and understand the common ESC/POS or Star languages. For example, the Epson TM-m30III and compatible models.

Star printers

Star printers work too: the TSP100IV, TSP143IV and mC-Print3 (StarPRNT), and the impact SP742 (Star Line Mode). Connect them to your network like any other printer. When you add the printer in Printing, choose its model and check the Command set: the right one is filled in for you, and you can change it. Epson and most other printers use ESC/POS.

Bluetooth and USB printers

ESC/POS printers over Bluetooth or USB work too, on an Android tablet that is set as a print host. Such a printer belongs to that one tablet. iPads and web browsers cannot print to Bluetooth or USB printers, so use a network printer there.

  1. In Devices, edit the Android tablet next to the printer (mode Order hub or Counter POS) and tick This tablet sends tickets to printers. The tablet then shows Print host.
  2. Bluetooth: pair the printer in Android's Bluetooth settings (the PIN is often 0000 or 1234). USB: plug the printer into the tablet, with a USB-C adapter if needed.
  3. On the tablet, open Settings with a manager PIN and find the Bluetooth and USB printers card. Allow Nearby devices when Android asks, and for USB tap Allow USB access once.
  4. In the dashboard, open Printing, add a Bluetooth or USB printer, choose the tablet, pick the printer it found and use Test print.

Setting up a network printer

  • Give the printer a fixed address on your network.
  • Keep the printer and the print host tablet on the same network. Do not use a guest network that blocks devices from seeing each other.
  • Use Test print in Printing.

See Set up printers and routing.

Not sure about your printer?

Contact us with the printer model and we will tell you if it works.

Was this helpful?