Skip to content
Kitchon

Type to search articles

Card readers

Take card payments in person on a Stripe smart reader, a Bluetooth reader or Tap to Pay at the counter, the kiosk and the table.

Updated November 17, 2026

What it does

Take card payments in person on a Stripe smart reader at the counter, at the kiosk and at the table. The guest taps, inserts or swipes a card on the reader. The payment is recorded on the order when Stripe confirms it.

What you need

  • A Stripe account for your restaurant, with card payments ready. See Payments with Stripe.
  • A BBPOS WisePOS E or a Stripe Reader S700, plugged in and connected to the internet.
  • A tablet in Counter POS or Self-order kiosk mode for each reader you use. Table service runs on the same tablets as the counter POS.

Turn it on

  1. Open Modules in the dashboard menu.
  2. Find Card readers in the list and switch it on.

This module needs at least one of these to be on: Point of sale, Self-order kiosk or Table service.

If your plan does not include this module, its card has no switch. Card readers are part of the Growth and Pro plans. Click Request this module and our team will get back to you. See Turn modules on and off.

Set up the readers

  1. Open Card readers in the Restaurant part of the dashboard menu. Owners and managers see it.
  2. In Step 1, click Create location on Stripe for each location. The location needs its full street address first. See Locations and hours.
  3. In Step 2, register a reader. On the reader, open Settings and tap Generate pairing code. In the dashboard, click Register reader, enter the code and give the reader a name such as Front counter.
  4. Still on the Card readers page, under Devices, choose the reader each POS station or kiosk sends its card payments to. The reader must be at the same location as the station.

The dashboard shows each reader as Online or Offline.

A reader on the tablet: Bluetooth or Tap to Pay (Android)

Instead of a smart reader from the dashboard, an Android tablet can use its own reader:

  • A Bluetooth reader: a Stripe Reader M2 or a BBPOS WisePad 3.
  • Tap to Pay on Android: the tablet's own NFC chip takes contactless cards and phone wallets, with no extra hardware. It needs Android 13 or later and a tablet with NFC.

To set one up:

  1. Make sure the location has its card reader location (Step 1 above). You do not register these readers in the dashboard.
  2. On the tablet, open Settings and find Card reader on this tablet.
  3. Tap Find Bluetooth readers, or Enable Tap to Pay on this tablet. The tablet asks for Location (and Nearby devices for Bluetooth) at that moment, and not before. Turn on location, Bluetooth or NFC if the tablet says so.
  4. For a Bluetooth reader, turn it on and keep it close, then tap Connect next to it. Do not pair it in Android's Bluetooth settings.
  5. Under Take card payments with, choose Reader on this tablet.

From then on the POS, the kiosk and the table payment screen use this reader. If it is not connected, the screen says so and the card option is not offered. Choose Smart reader from the Dashboard to go back.

Keep the reader updated: when an update is available, Card reader on this tablet shows Update reader. Keep the reader close, switched on and charged above 50%.

Things to know:

  • The tip is on the tablet. The reader does not show a tip screen.
  • Tap to Pay takes Visa, Mastercard and American Express cards and phone wallets. Ask Stripe whether Interac works on your account before relying on it. A Bluetooth reader takes Interac.
  • On an iPad or in a browser this is not available. Use a smart reader.

Take a payment

  1. On the POS station's tablet, ring the order as usual.
  2. When you take payment, choose the card reader option.
  3. Tap Send to card reader. The amount shows on the reader.
  4. Ask the guest to tap, insert or swipe the card. The tablet shows Waiting for card, then Processing.
  5. When the tablet shows that the payment was approved, the order is paid.

Tips

  • Tip on the tablet. The tip is part of the amount you send. Use this when the tip is already on the bill.
  • Tip on the reader. Choose Guest tips on the reader before you send. The reader shows three suggested tips, and the guest can pick one, type another amount or leave no tip. The tip is added to the order.

Interac debit

Interac debit cards are accepted on the reader. The reader asks for the PIN when it needs one. Interac payments are taken in one step, so there is nothing to capture later.

When a payment does not go through

  • The card was declined. The order stays unpaid. Ask the guest to try another card, or choose Pay another way.
  • The guest pressed cancel on the reader. Nothing is charged. Send the payment again if the guest wants to pay by card.
  • No card was presented in time. Nothing is charged. Send the payment again.
  • The reader is offline. Check that it is plugged in and connected to the internet. The dashboard shows it as Offline until it is back.
  • The reader is busy. It is still on another payment. Wait for it to finish, then try again.
  • The result takes a long time. Tap Check status. The payment is recorded only when Stripe says it went through.
  • Cancel card payment stops the payment on the reader. A card that is already being authorised cannot be stopped, so wait for the result.

Refunds

  • Refund a card payment from the order at the POS, as you do for other payments. The refund goes back to the guest's card.
  • If an order was paid partly by card and partly by cash, the card part is refunded first.
  • Interac cards must be refunded in person. The tablet asks the guest to tap or insert the same card on the reader, and the refund completes when the reader confirms it. If the guest does not present the card, tap Cancel. The amount can then be refunded again.

What is not supported

  • Offline card payments. Card payments need an internet connection. When the connection is down, take the payment another way.
  • Bluetooth readers and Tap to Pay on an iPad or iPhone. Bluetooth readers and Tap to Pay are available on Android tablets only. Smart readers (BBPOS WisePOS E, Stripe Reader S700) work with every tablet.

Common questions

Can I still use my own card terminal?

Yes. On the POS, choose Card to record a card taken on a separate terminal. It does not need this module.

Where do reader payments show in the reports?

Under Card in the end-of-day report, not under Online.

Was this helpful?